Sponsors of Wiimoteproject.com
IR Pens for Wiimote Whiteboard
Pages: [1]
« previous next »
  Print  
Author Topic: AA battery eliminator  (Read 2515 times)
0 Members and 1 Guest are viewing this topic.
mystre
*
Karma: +2/-0
Posts: 67
Offline Offline
View Profile WWW Email
« on: March 12, 2009, 10:45:14 AM »
I'm using a AA battery eliminator (with slight modifications as described) and I'm coming up with 127% power on the wiimote when I fire up the whiteboard.


Is that a huge problem?

Dale 
« Last Edit: March 12, 2009, 05:52:13 PM by mystre » Logged
mystre
*
Karma: +2/-0
Posts: 67
Offline Offline
View Profile WWW Email
« Reply #1 on: March 12, 2009, 12:21:01 PM »
I'm looking at this article

http://www.boonjin.com/smoothboard/index.php?title=Wiimote_modifications

Quote
This makes the use of the power source less critical. An AC adapter, laying around in the school or at someone's home, supplying 3 to 7 Volts is fine. The voltage regulator will bring down the voltage to 2,85 Volts.

So it looks like I should get the voltage regulator that brings the AC power adapter from 5 volts to 2.85 volts
Logged
benpaddlejones
Support Admin
*
Karma: +48/-0
Posts: 1172
Offline Offline
downriverpaddler@tpg.com.au View Profile WWW Email
« Reply #2 on: March 12, 2009, 05:15:51 PM »
mystre
Definatley, more than 3v will fry your Wiimote.

benpaddlejones Smiley
Logged

Check my Educational/Professional Learning WEB2.0 Trail - user: benpaddlejones
http://bloglearningrhhs.blogspot.com, http://www.youtube.com, http://www.teachertube.com, http://www.slideshare.net & http://www.delicious.com
mystre
*
Karma: +2/-0
Posts: 67
Offline Offline
View Profile WWW Email
« Reply #3 on: March 13, 2009, 05:26:13 AM »
Sorry for the dumb question, but I'm new to this and I don't want to burn anything down. 

So - in theory, I litterally just buy/find a 3 volt AC adapter, cut off its charging terminal and hook it up to the wiimote? but most AC adapters are not 3 volt.

If so-then this 3 volt adapter at the bottom of this page would work?
http://store.advancedmart.com/kaamfmshramo.html


Dale
« Last Edit: March 13, 2009, 05:53:35 AM by mystre » Logged
benpaddlejones
Support Admin
*
Karma: +48/-0
Posts: 1172
Offline Offline
downriverpaddler@tpg.com.au View Profile WWW Email
« Reply #4 on: March 13, 2009, 10:59:48 PM »
mystre
Yes, its that simple but...
1. Make sure 3v 1amp
2. Use a voltage meter to make sure definatley under 3v

benpaddejones Smiley
Logged

Check my Educational/Professional Learning WEB2.0 Trail - user: benpaddlejones
http://bloglearningrhhs.blogspot.com, http://www.youtube.com, http://www.teachertube.com, http://www.slideshare.net & http://www.delicious.com
mystre
*
Karma: +2/-0
Posts: 67
Offline Offline
View Profile WWW Email
« Reply #5 on: March 20, 2009, 04:46:28 AM »
would  3v  700mA work without potentially hurting anything?
Logged
benpaddlejones
Support Admin
*
Karma: +48/-0
Posts: 1172
Offline Offline
downriverpaddler@tpg.com.au View Profile WWW Email
« Reply #6 on: March 21, 2009, 12:02:32 AM »
mystre
Sounds good, maybe a little under current, but suck and see.

benpaddlejones Smiley
Logged

Check my Educational/Professional Learning WEB2.0 Trail - user: benpaddlejones
http://bloglearningrhhs.blogspot.com, http://www.youtube.com, http://www.teachertube.com, http://www.slideshare.net & http://www.delicious.com
JoriQ
*
Karma: +0/-0
Posts: 19
Offline Offline
View Profile
« Reply #7 on: May 26, 2009, 05:02:06 PM »
I'm curious if you have tried this and if it has worked?? I found a product with the same numbers and am going to give it a go.  It's only $4, so I'll probably just give it a try.

Quote from: mystre on March 20, 2009, 04:46:28 AM
would  3v  700mA work without potentially hurting anything?
Logged
---------------------
JQ
mystre
*
Karma: +2/-0
Posts: 67
Offline Offline
View Profile WWW Email
« Reply #8 on: May 26, 2009, 06:01:26 PM »
I found a 3V 300mA over the weekend and tried it.  The was reading %132 on the wiimote.  MY wiimote is working, but I would definitely check with a voltage meter as BPJ suggested earlier in the thread.
Logged
JoriQ
*
Karma: +0/-0
Posts: 19
Offline Offline
View Profile
« Reply #9 on: June 11, 2009, 08:42:21 AM »
Working like a charm! I used an eraser to hold the red button down, but I have found that syncing within the 10 sec (or whatever it is) time frame is unreliable.  Instead, I put another eraser in the stand I use and put the wiimote in upside down to hold the A & B buttons down permanently.  Great fix!! I'll try to take a photo of it at some point.
Logged
---------------------
JQ
Pages: [1]
  Print  
« previous next »
 
Jump to:  

TinyPortal v.1.0.6 beta 2 © Bloc
Clicky Web Analytics