...  extension that pugs directly into our AC/DC adapter listed on our webpage. We  ...
... 

Best wishes to you this new year,
teachwithtech. ...

...  7 if using the Widcomm drivers / stack. I have tried to install Widcomm  ...

...  my project using wiimote. I want track a position of a shoot from air guns  ...
...  array with 6x10 and suplie it with 9v ac/dc adapter, each led with 1,5v . I use  ...

...  Remote Sync Accessory from Teachwithtech.com

This new  ...
...  same features of our wired remote sync accessory, but uses a wireless rf (radio  ...
...  at a time. Our unit can be expanded to accommodate any number (up to 16 depending  ...
...  to be used in conjunction with our AC/DC adapter to provide users with a way  ...
...  mentioned above, please visit: http://teachwithtech.com/Remote-Sync-Products-c17/

 ...
...  questions? Please email contact@teachwithtech.com


 ...

... .com

Bundled with our QUICKUSB, this package is sure to please.

This product is  ...
...  a look at our QUICKUSB. We can add an AC/USB Adapter for a small charge. ...

...  All
3P Interact are now supplying a complete remote  ...
...  data projector mount, a clip in power adapter with built in mount thread and a remote  ...
...  on the wiimote normally goes and an ac/dc adapter is plugged directly into it.  ...
...  setups. Have a look at www.3pinteract.co.nz and http://3pinteract.blogspot. ...
... /
Regards

Dave, Rob, Steve
3P Interact  ...

...  Spot" Wiimote Tripod Mount
Item # SPT-ACC

Mini Tripod
Item # TRI- ...
... 
USB Mini Bluetooth Dongle
Item # USB-ACC

Wiimote Rechargeable  ...
...  Pack
Item # RBP-ACC

USB AC  ...
...  Adapter
Item # ACA-ACC

 ...
...  need something else?

2)What the best place to buy them? i found this website

 ...
... ://www.wiiteachers.com/

 ...

... 's what I do:

I bought a $5 AC Adapter from BigLots and switched it to  ...
...  from my students to maintain contact between the 9V adapter and the  ...

...  but if I were to implement the interactive white board and use it regularly in  ...
... . Has anyone thought of developing an ac adapter/powered cradle or such? I will  ...

...  all,

I have an idea about how to accomplish remote syncing that would be  ...
...  or effort. I wanted to get some feedback on what people think, so please try it  ...
...  there might be other uses as well.

Background:
In a classroom setting, with  ...
...  as the pole mount available from 3PInteract. However, there seems to be the  ...
...  all these solutions that you have to reach high up to press the 1 & 2 buttons to  ...
...  down or soldering in a remote switch to activate the 1 & 2 buttons (or the red  ...
...  system more difficult to service or replace down the road.

New solution:
I  ...
...  instead to plug the Wiimote AC adapter (see other posts) into an  ...
...  Wiimote (thus the units are easy to replace down the road). If a switched outlet  ...
...  quirks and difficulties with this approach. The user only has 20 seconds to  ...
...  requires the Microsoft Bluetooth stack (standard in Windows XP SP2 and SP3).  ...
...  Bluetooth adapter tested was the Iogear GBU421.

The  ...
...  consume virtually no power, and it can actually remain "alive" for 5-10 seconds  ...
...  for ~5-15 seconds, and then turn it back on. In testing, this is a reliable  ...
...  the discovery process. Evidently, the AC power to the Wiimote must also not  ...
...  power-down. Finally, depending on what AC adapter is used, it might be necessary  ...
...  in parallel to the Wiimote so that the adapter quickly loses voltage when the AC power  ...
...  solution. I’m excited to hear feedback on these ideas. Please post here with  ...

...  on eBay from HK. Couple that with a USB AC adapter and you should be in business.  ...

...  teachwithtech,
If you use the rechargeable  ...
...  packs as pictured above, they will  ...
...  better solution to purchase a 3 volt AC adapter and connect it to the terminals  ...
...  the laptop down at the end of the teaching day so the wiimote just stays  ...
...  all week. Walk in each morning, turn on the data projector  ...

... 


how could i use

http://img141.imageshack.us/my.php?image=picturert3.jpg


to  ...
...  this?


http://img12.imageshack.us/my.php?image=picture001sq2. ...

...  Tablet PC
Bluetooth Dongle
3volt AC to DC adapter (static wiimote power  ...
... 
PowerPoint
various textbook CD-ROM interactive Flash based

The setup:

Note: the  ...
...  WiiRemote (above whiteboard)


AC to DC powered WiiRemote



IR Pen v1 ( ...
...  work except for clicking, the dragging action causes the IR led circuit to not  ...

...  USB-A port for the charger so I used an adapter to change A to B, but I cannot get  ...
...  this set up. I want to avoid using an AC adapter except as a last resort. can  ...
... .com/nintendo_wii_video_games_accessories_dekcell_cpa_1193.html

Link  ...
...  adapter: http://www.amazon.com/USB-Type-Female- ...
... -Adapter/dp/B000GHUIF4/ref=sr_1_1?ie=UTF8&s= ...

...  far I think I'm traveling a parallel track, and here's my shopping list:

Walmart: ...
...  AC/DC power adapter $13
Walmart: WiiMote $ ...
... . Probably I'll end up stuffing the AC/DC adapter and the remote AC on/off  ...

...  clip about 30 cm up. The line then runs across to the wall beside my desk to  ...
...  clip then runs down the wall. To sync each time, I simply pull on the end of the  ...
... . I dont have to leave my seat or reach up with a ruler any more. Sooooo easy  ...
... . My wiimote is poweredby a 3 volt AC adapter and is plugged into the ceiling  ...

... , I litterally just buy/find a 3 volt AC adapter, cut off its charging terminal  ...
...  hook it up to the wiimote? but most AC adapters are not 3 volt.

If so-then  ...
...  3 volt adapter at the bottom of this page would work?
 ...

... , you mentioned using an old router adapter/cord for AC to DC, right? Notes? ...

...  purchased a Wiimote (~$30) a bluetooth adapter ($30 from target) and some IR led's,  ...
... , AC adapter, some solder and misc stuff ($ ...
...  from radio shack)...

I have GlovePIE and your script,  ...