Sponsors of Wiimoteproject.com
IR Pens for Wiimote Whiteboard
Wiimote Project » Forum » Hardware Support » IR Pens » Idea: IRPen with track cursor and click
Pages: [1]
« previous next »
  Print  
Author Topic: Idea: IRPen with track cursor and click  (Read 3222 times)
0 Members and 1 Guest are viewing this topic.
repeat83
*
Karma: +0/-0
Posts: 3
Offline Offline
View Profile WWW
« on: November 15, 2008, 02:58:01 AM »
principle:
dot1 - always visible.
if (dot2 visible) then Click left mouse button

ps. if (dot2 visible) and (dot3 visible) then Click right mouse button


psps. sorry for my pooooor english
Logged
repeat83
*
Karma: +0/-0
Posts: 3
Offline Offline
View Profile WWW
« Reply #1 on: November 15, 2008, 03:23:18 AM »
use modding this irpen http://www.wiimoteproject.com/ir-pens/diy-how-to-make-tip-pressure-ir-pen/

if irpen touch screen (press button under dot1) then active dot2
if pressed button for active right click and irpen touch screen (press button under dot1) then active dot2 and dot3

buffles use for limit IR light in small area of transparent pen
Logged
Wiweeyum
Guru
*
Karma: +6/-0
Posts: 203
Offline Offline
stoneydumples@hotmail.com stoneydumples View Profile
« Reply #2 on: December 09, 2008, 07:31:11 AM »
That's catchy. So it would track the first dot continually and register that as the "cursor" dot. With a modified whiteboard program, this could work in concept. The issue would then become covering the second or third dots with your hand. If any of them were covered while the right-click button was pressed, it would send funny signals to the computer.
Logged

~"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction."~
- EF Schumacher
UndCon
Support Admin
*
Karma: +11/-2
Posts: 564
Offline Offline
View Profile
« Reply #3 on: December 10, 2008, 04:26:38 AM »
The problem is that the IR's have to be located a bit apart.

If they are not - they might be registered as 1 IRdot which happens every now and then when I'm using 2 IR-pens...
Logged
SirSalute
*
Karma: +0/-0
Posts: 3
Offline Offline
View Profile Email
« Reply #4 on: March 10, 2009, 03:55:26 AM »
Can one of the LED of IRPen be pressure-activated and the second LED button-triggered. If this is possible, would it work like a mouse?   pressure-activated LED = dot1 button-triggered = dot2
dot1 == on
     Right-click mouseUp
     Left-click mouseDown
dot1 && dot2 == on
     Left-click mouseUp
     Right-click mouseDown
else
     Right-click mouseUp
     Left-click mouseUp
Logged
mason
*
Karma: +0/-0
Posts: 20
Offline Offline
View Profile
« Reply #5 on: July 14, 2009, 07:56:42 PM »
bump...

Any software that use this idea ?

the 2nd led can be used to send morse code, but then we end up with more buttons.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

TinyPortal v.1.0.6 beta 2 © Bloc
Clicky Web Analytics