Sponsors of Wiimoteproject.com
IR Pens for Wiimote Whiteboard
Wiimote Project » Hardware Support » IR Pens » IR Led Specifiaction
Pages: [1]
  Print  
Author Topic: IR Led Specifiaction  (Read 9477 times)
0 Members and 1 Guest are viewing this topic.
*
Karma: +0/-0
Posts: 8
Offline Offline
View Profile
« on: January 14, 2008, 11:12:40 AM »

firstly well done Johnny Lee!.. great stuff, have you had any job offers from Ninentdo yet? I'm a game developer and I'm on a mission to get his working on my laptop as a first port of call.

However, the glasses require a few questions...

what type of IR Leds should I purchase?
what voltage to power them with? Resistor or potentiometer?
is it worth doing the leds at either side of the glasses in clusters?

Further, where might I get something like this in the UK? The electronics superstore in the UK is www.maplin.co.uk but seems to have only one type of 950nm IR Led.

Perhaps there is a specification docs on the standard sensor bar that give clues?

Best regards,
Spurtus.
Logged
*
Karma: +2/-0
Posts: 123
Offline Offline
View Profile Email
« Reply #1 on: January 16, 2008, 07:09:57 PM »

same thing with me, i just bought 100 150 ma IR leds from a digi key catalog, but i was wondering if i needed and resistors, or how much voltage i needed. If you could tell me, that would be great
Logged
Guru
*
Karma: +16/-0
Posts: 177
Offline Offline
atomriot@hotmail.com colbzilla View Profile
« Reply #2 on: January 16, 2008, 07:36:55 PM »

ledcalc.com is a good place to check that

it depends on how many leds are in your pen, and what their forward voltage is.

i have a 1.2v LED that i have inline with just 1 battery. its max forward voltage is 1.8 so its able to run just fine.
Logged

Details, details. Things to do. Things to get done. Don't bother me with details, just tell me when they're done.
--
James Lionel Price

*
Karma: +2/-0
Posts: 123
Offline Offline
View Profile Email
« Reply #3 on: January 16, 2008, 07:37:55 PM »

it is 1.5v for one and the max is 3v i believe
Logged
*
Karma: +2/-0
Posts: 123
Offline Offline
View Profile Email
« Reply #4 on: January 16, 2008, 07:45:07 PM »

hey, thx for the site
Logged
*
Karma: +0/-0
Posts: 3
Offline Offline
View Profile Email
« Reply #5 on: January 27, 2008, 05:13:56 PM »

I am also in the UK and also unsure as what is the best IR speced LED to purchase from experienced user's experience?

Thank you!
Logged
*
Karma: +2/-0
Posts: 8
Offline Offline
View Profile
« Reply #6 on: January 28, 2008, 04:02:50 AM »

In the UK Maplins or Farnells (online) are best.
I bought 2x YH70M from Maplins and run them parallel with one AAA battery, no resistor and they work just fine.
Logged
Pages: [1]
  Print  
 
Jump to:  

Clicky Web Analytics