Sponsors of Wiimoteproject.com
IR Pens for Wiimote Whiteboard
Wiimote Project » Hardware Support » Other » IR Array online?
Pages: [1]
  Print  
Author Topic: IR Array online?  (Read 5230 times)
0 Members and 1 Guest are viewing this topic.
*
Karma: +0/-0
Posts: 4
Offline Offline
View Profile
« on: November 06, 2008, 01:45:15 AM »

Hello,

I wonder if there's anywebsite selling working IR Array for Finger Tracking Project of Johnny Lee

I did search through every post of this forum and only found out some posts by admin about websites selling parts of the IR Array.

You still have to end up making one yourself!

And it is totally impossible for a person who know nothing about electric like me!

Please can you help me!

Thank you very much!
Logged
Support Admin
*
Karma: +11/-3
Posts: 566
Offline Offline
View Profile WWW
« Reply #1 on: November 06, 2008, 10:06:04 PM »

I'm about to get some arrays

They look like this one but with IRdiodes...





Of course they can be clustered together...

Dualsided PCB, 12pc 5mm diodes. measures only 42x12x1,6mm.
4 circuits of 3 diodes in series - can also be sold separately.

Will be tricked out with 12 VISHAY TSAL 6400 IR diodes and surface-mounted resistors

They will require 6Volt powersource and if needed I can supply that one as well...


I have no clue yet of the total cost but as usual I'll charge as less as possible to maintain the service to forum members

//UndCon
« Last Edit: November 06, 2008, 10:12:19 PM by UndCon » Logged

*
Karma: +0/-0
Posts: 4
Offline Offline
View Profile
« Reply #2 on: November 10, 2008, 07:48:19 PM »

That would be great if you can make me one!

As long as it works, I don't put much stress on money  Smiley

Also, I wonder if your array looks different from Johnny's as on the video, he said you should make a hole in the middle of the array for the Wiimote?

Regards
Logged
*
Karma: +0/-0
Posts: 1
Offline Offline
View Profile
« Reply #3 on: November 13, 2008, 04:36:26 AM »

Hi there,

I'm interested too  Smiley

beaver
Logged
Support Admin
*
Karma: +11/-3
Posts: 566
Offline Offline
View Profile WWW
« Reply #4 on: November 27, 2008, 05:24:11 PM »


It's all set up!
I only have to order a few PCB's and most likely LED-drivers to go...

I already have Vishay's so I have some soldering to do Smiley

Then I can start distributing PCB's as DIY or preassembled with Vishay's

//UndCon
Logged

Pages: [1]
  Print  
 
Jump to:  

Clicky Web Analytics