Sponsors of Wiimoteproject.com
IR Pens for Wiimote Whiteboard
Wiimote Project » Forum » General Wiimote and Technology » Project Ideas » I made 3D distance measurement application
Pages: [1]
« previous next »
  Print  
Author Topic: I made 3D distance measurement application  (Read 1353 times)
0 Members and 1 Guest are viewing this topic.
visusee
*
Karma: +0/-0
Posts: 2
Offline Offline
View Profile
« on: May 07, 2009, 04:26:54 PM »
I had used 2 Wii controllers to get 3D information.  So far Wiimote people notice that the focal distance of Wii is "1320" without any specific reason. However, after I did several experiments, I found that it is not so true. To get focal distance, translation, rotation, principle point information, you need to calibrate your Wii controller. I have 4 Wii controllers and every controllers has a little bit different characteristics.

Anyway, now I can get 3D point information less than 1mm error when I moved 1 inch.
I hope you enjoy this movie.

http://www.youtube.com/watch?v=sj2-BR0PbRA

Jinho
Logged
steve6
*
Karma: +0/-0
Posts: 15
Offline Offline
View Profile
« Reply #1 on: May 12, 2009, 11:36:39 AM »
Hi Jinho
I have made some similar test but using my system at 6-DOF create with Wiimote: http://sanna.polito.it/wiitracking/index.htm

But in my system I use a passive marker.

I try to create a cloud point of a plane or sphere.
What are you going to do the your cloud point??What information about precision do you have??

Thanks Steve
Logged
visusee
*
Karma: +0/-0
Posts: 2
Offline Offline
View Profile
« Reply #2 on: May 15, 2009, 01:22:11 PM »
Hey, steve

I am going to generate 3D object by using point cloud. (not exactly! because I will change my program to generate surface instead of points)

So far I got 0.8mm ~ 0.1mm precision when I measured within small boundary. (70cm * 70cm * 70cm area)
But I am sure I can get much better precision. (When I measured sensitivity of Wii, I found that Wii can sense 50 micro-meter difference, which is great)
Logged
Misha
*
Karma: +0/-0
Posts: 29
Offline Offline
View Profile WWW
« Reply #3 on: June 01, 2009, 08:10:42 AM »
Good work. Smiley This is a thing I am getting around too. I actually believe Wii Remotes can be auto calibrated, which gets to be worked out, so that no fixed nesting (like it is done on the vid: in a wooden element) is needed.

Just for the record, here is a bit about my tries to get the Wii Remotes auto calibrated:
http://www.wiimoteproject.com/project-ideas/two-wii-remote-cameras-auto-calibration/msg9863/#msg9863
« Last Edit: June 30, 2009, 05:03:14 AM by Misha » Logged
++
jisujiloo
*
Karma: +0/-0
Posts: 2
Offline Offline
View Profile Email
« Reply #4 on: July 22, 2009, 06:50:10 AM »
Hi!!! Jinho..
I have a question concerning using matlab for calibration.
I think that the matlab uses  the image files for calibration.
but the wiimote gets ir dot points.
how do you use matlab for calibration without image files?
thanks...
Logged
Misha
*
Karma: +0/-0
Posts: 29
Offline Offline
View Profile WWW
« Reply #5 on: July 22, 2009, 10:50:08 PM »
I guess there is a way to create the needed images from the point data, even if you use an external program for that. Even a PHP script would do fine.

On the other side, it is hard for me to believe that images and only images are the only input possible, since Matlab most likely extracts the point info from them in the process. Perhaps you can pass the phase of generating / procssing image data.
Logged
++
jisujiloo
*
Karma: +0/-0
Posts: 2
Offline Offline
View Profile Email
« Reply #6 on: July 30, 2009, 03:15:53 AM »
Hi~
I made the image to use matlab calibration tool...
so I executed matlab calibration... I got the focal length...
but I think that the focal length which I got is inaccurate...
The focal length that I got is roughly 1080.
but We usually used the focal length "1320".
The number of both the focal length is very different...
so I have a question concerning the number of focal length that you got...  Huh
thanks...
« Last Edit: July 31, 2009, 01:44:11 AM by jisujiloo » Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

TinyPortal v.1.0.6 beta 2 © Bloc
Clicky Web Analytics