Author Topic: Ac/dc adapter/mount system/remote syncing button from 3P Interact Ltd  (Read 13621 times)

Offline Davo

  • *
  • Posts: 30
  • Karma: +2/-0
    • View Profile
Hi All
3P Interact are now supplying a complete remote mounting system for the wiimote. It consists of a high quality data projector mount, a clip in power adapter with built in mount thread and a remote syncing button.

The insert is something we have been developing for a considerable time. It clips in where the battery cover on the wiimote normally goes and an ac/dc adapter is plugged directly into it. It handles a wide range of voltages and regulates the current supplied to a steady 2.9vdc (which the wiimotes like).

The remote syncing button plugs into the mount wiring harness and allows the user to put the wiimote into 'discoverable' mode remotely (the button is supplied with a 10m extension cable).

There is no physical interference with the wiimote itself except for the removal of the battery cover (which could be refitted if the user wanted at a future time).
All three items are supplied as part of our Classroom Kit which is a professional solution aimed at permanent classroom setups. Have a look at www.3pinteract.co.nz and http://3pinteract.blogspot.com/
Regards

Dave, Rob, Steve
3P Interact Ltd



Offline Macgyver101

  • *
  • Posts: 17
  • Karma: +0/-0
    • View Profile
Can the adapter be purchased seperatly from the Kit?   I have everything else. 



Offline Davo

  • *
  • Posts: 30
  • Karma: +2/-0
    • View Profile
Hi, we are going to have to come to a decision about this, as it has come up a few times recently.
I will get back to you by the end of the week.
Dave
3P Interact Ltd
www.3pinteract.co.nz