I have just bougth a new wiimote, the wiimote was found and connected successfully with the bluetooth, but when I tried to start smoothboard (and also wiimotewhiteboard), I received the following message: "Error reading data from Wiimote...is it connected?"Also I have an old wiimote that still works without errors with both softwares.I have looking the answer on the web, without success. How I can fix this problem? Thanks for your help.
Quote from: luxa on January 13, 2010, 07:12:57 PMI have just bougth a new wiimote, the wiimote was found and connected successfully with the bluetooth, but when I tried to start smoothboard (and also wiimotewhiteboard), I received the following message: "Error reading data from Wiimote...is it connected?"Also I have an old wiimote that still works without errors with both softwares.I have looking the answer on the web, without success. How I can fix this problem? Thanks for your help. Hi,Most probably your problem occurs because you have installed another Wiimote prior to this. Therefore, the software will look for the first Wiimote if you have unintalled/remove it from your system.To connect the this new Wiimote in Smoothboard, you can just set the software to connect to multiple Wiimotes. Go to Smoothboard Settings->Wiimote and Set the software to 2 Wiimotes and restart.Alternatively, you can remove the previously installed Wiimote from your system either by the System Tray Bluetooth icon or via the Device Manager found under Control Panel->System->HardwareRegards,Boon Jin
Has anyone found a fix for the Windows 7 issue?I've had the same problems as many other posters here.I've tried plenty of different drivers, still cant get the Wii Remote to link correctly.BUT it works fine in Dolphin!? Using the "pair up" button under "Real Wiimote".... So it would seem like its fixable! Please help, im trying to emulate over 'neyah-WG
I tried the demo/trial of SmoothConnect and the whiteboard program you offer.... no no avail.I'm losing hope. When I first started this I was able to get GlovePIE to work with my wii remote, but now it wont interact AT ALLWhen I booted Smoothboard, it notified me that "No write access to application folder"Would "find" my wiimote. The wiimote LEDs continue to flash even though Smoothboard/Smoothconnect says it is connected to the wiimote, and no programs (Smoothboard; GlovePIE; etc) will recognize input from the "connected" wiimote