Wiimote Project

Hardware Support => Bluetooth & Connectivity Help Center => Topic started by: Tazman on January 14, 2009, 04:55:47 PM

Title: SOLVED - Wiimote semi-works
Post by: Tazman on January 14, 2009, 04:55:47 PM
Hey,

I've been messing with this problem for a while but can't seem to get a solution. When I connect to the wiimote through the inbuilt vista stacks it says it has connected fine, but the lights on the wiimote remain flashing. At this point some applications on Glovepie seem to work, but the DesktopVR doesn't. In order to test if it's vista that is the problem I tried using smoothboard, and when I load it up it also reports that it cannot find a wiimote. However at the time it loads up the wiimote changes from flashing LEDs to just the player 1 LED constant on, but this also breaks the limited functionality I had on GlovePIE until I remove the batteries from the remote.

I tried the sticky in this forum but couldn't get C# installed, the installer froze. I tried using the replacement .exe someone else posted but that did not change anything. I'm trying to use the inbuilt bluetooth adapter on my Sony Vaio FW21E.

Thanks for any help,

Taz
Title: Re: Wiimote semi-works
Post by: benpaddlejones on January 14, 2009, 06:05:07 PM
Tazman
Read: http://www.wiimoteproject.com/bluetooth-and-connectivity-help-center/bt-problems-a-self-help-guide-**-please-read-before-posting-problem**/ (http://www.wiimoteproject.com/bluetooth-and-connectivity-help-center/bt-problems-a-self-help-guide-**-please-read-before-posting-problem**/)

And post what you did/happened.

benpaddlejones :)
Title: Re: Wiimote semi-works
Post by: benpaddlejones on February 01, 2009, 02:20:50 AM
PM by Tazman
Problem solved.

benpaddlejones :)