Wiimote Project

General Wiimote and Technology => General Hardware Talk => Topic started by: Grossypossy on September 10, 2012, 03:37:55 AM

Title: Cheap lowtec, DIY, PVC, wiimote holder.
Post by: Grossypossy on September 10, 2012, 03:37:55 AM
A little bit McGyvering on a sunday afternoon,

For a wiimote Plus, don't know if older version also has nothes on the sides.
Take a 40mm x 60mm pvc pipe.
Cut away a strip 25mm.
Drill a 5,5mm hole, then press and screw it on the tripod.
(the trick is to get the hole right in the center).

Have fun,
Gossypossy.