Author Topic: increasing feild of view of the remote  (Read 3867 times)

Offline clazen

  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
on: February 03, 2009, 11:57:25 AM
I have this project but I don't know if it would work, so I'm asking if anyone has tried the following.

2 or 4 remotes, connected and placed on each corner of a display, facing in, so since the FoV is 45 degrees, with 4 remotes you can cover the whole area, lets say a 65" screen, the reason for the question is that i dont have the overhead space to place a remote.. any ideas???

Thanks

C



Offline lonerayven

  • *
  • Posts: 5
  • Karma: +0/-0
    • View Profile
Reply #1 on: February 12, 2009, 10:40:29 PM
I believe the current best application for wiimote boards (Smoothboard in my opinion) only allows for 2 wiimote coverage. Could you try a less extreme angle but with two wiimotes? say instead of just off the surface, maybe 5-10 inches off the surface point towards the middle? On the sides of course. Or one at an extreme angle and one on a bookshelf or something?



Offline Wiweeyum

  • *
  • Posts: 203
  • Karma: +7/-0
    • View Profile
Reply #2 on: February 13, 2009, 03:17:41 AM
If you want to get really fancy, you may be able to put one at an extreme and use an optical lens to make the camera see a wider angle. I don't know if it's been done before, but it would sure be cool.


~"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction."~
- EF Schumacher


Offline Misha

  • *
  • Posts: 29
  • Karma: +0/-0
    • View Profile
    • CPP TEA
Reply #3 on: February 16, 2009, 11:05:44 PM
Hello everyone,
I also intend to play with this, but let me first notice that I found somewhere that Bluetooth would allow attaching only up to 7 Wiimote devices.

My question is: is pairing the devices essential for using more than one simultaneously?

++