Author Topic: How do you get a uniform screen when projecting at an angle?  (Read 7168 times)

Offline OM2

  • *
  • Posts: 37
  • Karma: +0/-0
    • View Profile
When using a projector, how do I get a uniform screen when projecting at an angle?

(OK: not exactly a direct wiimote question... but I though I'd ask... as I assumed there would be plenty of experts on this forum)

I always end up with a wonky rectangle
OK: I don't have a huge amount of experience

Any replies would be great!

Thanks


OM



Offline JoriQ

  • *
  • Posts: 19
  • Karma: +0/-0
    • View Profile
Reply #1 on: November 09, 2008, 05:53:41 PM
Depending on your projector, there will be a setting to adjust that sort of thing, just like a regular computer monitor has.  I think most people project from the front though, so I don't know how much you can adjust it.  Your range on angles probably isn't too high.

---------------------
JQ


Offline jappish

  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Reply #2 on: November 18, 2008, 10:55:45 AM
If I understand you right you picture looks like kinda' like this:

 ____
/___/

or like this:

 ____
/____\

well you get the point...

If thats the case then go in to the projector menu (or check buttons on the projector) and look for the word "Keystone"

hope this helps



Offline OM2

  • *
  • Posts: 37
  • Karma: +0/-0
    • View Profile
Reply #3 on: November 18, 2008, 11:08:26 AM
that helps a lot actually
not having much experience of projectors... i was clueless
i'll give this a go
thanks :)