Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - teachwithtech

Pages: 1
Wireless Remote Sync Accessory from

This new addition to our lineup offers a non wired option for remotely syncing your wii remote. It offers the same features of our wired remote sync accessory, but uses a wireless rf (radio frequency) remote to put the wii remote into discovery mode.

This setup also solves a few problems with previous products that are controlled via an rf signal.

#1:  Limited Frequencies:  Many of the rf products you will see only have one or two frequencies.  This means that if a school were to purchase more than one, it is entirely possible and probable that users could without knowledge be turning off and on another colleague's wii remote.  This is because the unit uses an rf signal which goes through walls up from anywhere from 30-100 feet.  Our setup allows for 16 different frequencies to be programmed and can be widely implemented in schools.

#2: Not expandable: Many of the other rf products come with the ability to only turn on 1 wii remote at a time.  Our unit can be expanded to accommodate any number (up to 16 depending on the remote you choose) of wii remotes or lamps.  There is no reason to have to buy a whole new unit to have the ability to control more than one wii remote or lamp at a time. 


Introductory price of $27.99

Base Receiver that powers one wii remote and allows for other power modules to be added:

Remotes Available to be added at no additional cost (choose one of the two):

Keychain Remote: Control up to 4 devices

Multifunction Remote: Control up to 16 devices and your vcr, tv, or dvd player.

Wireless Remote available to add for an additional cost:

Wireless Wall Mount: Control up to 3 Devices

Expandable options:

Add the ability to control extra wii remotes for $11.99 a piece:

Add the ability to control regular lamps up to 300 watts $4.99 a piece. (Will not work with power saving lamps or fluorescent lights):

**All of these products are designed to be used in conjunction with our AC/DC adapter to provide users with a way to remotely sync your wii remotes without wires.  Please see our webpage for details.

Introductory Video:

If you would like to visit our site and the products mentioned above, please visit:

Any questions?  Please email [email protected]


IR Pens / Tip Activated Infrared IR Pen from
« on: December 23, 2009, 07:10:14 PM »
Touch Sensitive Infrared Pen from now has a touch sensitive infrared pen available that can be stored on any magnetic surface. Details and features listed below

  • Vishay TSAL6400 Infrared LED
  • Endcap to Protect infrared LED
  • Easily Removeable battery endcap with AAA battery and battery holder.
  • Rubberized triangular grip for ease of handling.
  • Embedded magnet that can be stored on any magnetic surface including a magnetic whiteboard.


Introductory Video of Product:


AC/DC Adapter and Remote Sync Available Now from has been working hard to help the wiimote whiteboard become a more permanent solution in the classroom.  This is why we are now offering a direct plug in adapter and insert for the wii remote.  This in conjunction with our remote sync accessory allows the user to never have to press the 1 and 2 buttons again!

AC/DC Adapter and Wii Remote Insert Specifications:
    This adapter works much like batteries in that it supplies the necessary power for safe and reliable use of your wii remote.
    • Input: 100-240 VAC (Can be used around the world with proper plug size adapter which we will carry shortly)
    • Output: 3 VDC
    • Cord Length: 6 Feet
    • White Extension Cord: 4 Feet
    • Total Length of Cords: 10 Feet

Wii Remote Insert/Mount Specifications
  • Inset 1/4" x 20 Thread Count for easy mounting for Tripods or our Ceiling Mounts
  • Green power indicator light
  • Fits snugly for easy installation
**Tested with both smoothboard 1.6 and Wiimote Whiteboard 1.0.1

$34.99   **Discount when bundled with our remote sync accessory. See webpage for details.

Hassle Free Wired Pushbutton Remote Sync Accessory

This remote sync accessory plugs directly into our AC/DC adapter and extension for a hassle free way to remotely sync your wii remote.  Need  to put your wii remote into discovery mode?  Just install this accessory (simple plug in), mount the pushbutton to your desk/wall/whiteboard and then press the button anytime you need to put the wii remote into discovery mode. No programming or batteries needed.
  • Barrel type plugs that plug directly into our ac adapter
  • Surface Mount Switch
  • 25 Foot long cord that allows for installation in almost any situation
  • Includes the "sync spot" that is installed on the sync button on the wii remote (see video demonstration below)

$19.99    *****Discount when bundled with our AC/DC adapter and Wii remote insert. See webpage for details.

Video Demonstration of product


Wireless Remote Sync to come soon.

Accessories / Wii Remote Mounting Solutions from
« on: October 03, 2009, 11:24:59 AM »
Mounting Solutions for the Wii Remote

White "Original" Wii Remote Mount and Threaded Battery Cover  ($22.99)

*Wiimote battery cover with 1/4-20 Threaded mount

   1)False Ceiling Mount
    2)Wide angle modification system.

*Nintendo Wii Remote not included with this purchase.

Only recommended for Ceilings anywhere between 7 - 12 feet depending upon your wiimote operating area. If you have a higher ceiling, please see our extension options.

Silver w/Options Mounting Solution  ($22.99)
*Wiimote battery cover with 1/4-20 Threaded mount

   1)False Ceiling Mount
   2)Wide angle modification system.
   3) Optional Solid Ceiling/Stand alone attachment (Additional $2.00 )
   4)Optional 1” Extension (additional $1.00 per extension)


Combine these mounts with our Threaded Continuous Power Option to make your mounted Wii Remote Permanent.

**Please visit for more information and to purchase one of our products.

Accessories / Wii Remote Mount/Battery Solution from
« on: October 03, 2009, 11:15:19 AM »
Wii Remote Mount/Battery Solution from

At, we are striving to make the wiimote project a permanent solution in the classroom. The product discussed below was a transition product until we were able to offer a hassle free constant power source that did not rely on batteries.  Thank you everyone for your input and discussion!

If you do need a rechargeable solution, please contact us at: [email protected]

Otherwise, you can view our new product in our recent post or at

10 Pack Vishay TSAL6400 LED's at

You can also find other products at

7 Infrared Pens and accessories  with Free Shipping

About has grown from one Mathematics instructors vision of using technology in the classroom to a real source of products for Teachers and Presenters of all types.   Many products and services are available, if you’re not sure about a product or service, please email: [email protected]

Types of Infrared Pens Available:

Magnetic infrared pens ($17.99)

New Design Features:
  1) New Surface Mount Pushbutton Switch - Supplies a sensitive switch that even those with hand dexterity issues can use.
  2) Added manufacturing process to make the removal of the battery cover easier.

[/b] Vishay TSAL 6400 infrared LED, Pushbutton Momentary Switch, AAA battery and battery holder, Embedded magnet for storage on any magnetic whiteboard, removable cap.

Sample Picture of our Magnet Infrared Pens
Other Colors Available: Light Blue, Blue, Dark Blue, Green, Pink, Orange, and Black.

Introductory Video Of Magnetic Pen:

Multifunction IR Pen $18.99

Features: Laser, Vishay IR Led, Ballpoint Pen, Stylus, 6 LR41 batteries (3 replacement batteries)


Economy Pen $9.49

Features: Vishay infrared Led, momentary switch, and 3 LR41 batteries


If you would like to purchase from my webpage, please visit or you may visit my ebay auctions by clicking one of the links below

Ebay auction:

If you need to contact me, please email [email protected]

Pages: 1