Author Topic: Cheap lowtec, DIY, PVC, wiimote holder.  (Read 5215 times)

Offline Grossypossy

  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
on: September 10, 2012, 03:37:55 AM
A little bit McGyvering on a sunday afternoon,

For a wiimote Plus, don't know if older version also has nothes on the sides.
Take a 40mm x 60mm pvc pipe.
Cut away a strip 25mm.
Drill a 5,5mm hole, then press and screw it on the tripod.
(the trick is to get the hole right in the center).

Have fun,