Wiimote Project

Hardware Support => IR Pens => Topic started by: Renato on January 31, 2008, 07:36:17 PM

Title: I've done it! Almosr instantaneous IR Pen
Post by: Renato on January 31, 2008, 07:36:17 PM
I went over to The Sharper Image store and bought the Inova Blue Led Micro Flashlight (http://www.sharperimage.com/us/en/catalog/product/sku__EM229) then  I wen to Radio Shack and bought the High Output 5mm Infrared LED (http://www.radioshack.com/product/index.jsp?productId=2062565&cp) cause it was the only IR LED they had.

Got home, easily poped open the key chain, switched the LED bulbs after triming the IR to the proper size.

IT was a perfect match!

At first I thought it wasn't working but after much thought I realized that I wasn't being able to SEE the IR light.

So it works!
Title: Re: I've done it! Almosr instantaneous IR Pen
Post by: Der Wichtel on February 01, 2008, 03:36:34 AM
You should add a resistor otherwise the IR-LED won't last very long
Title: Re: I've done it! Almosr instantaneous IR Pen
Post by: dice on February 01, 2008, 06:49:58 AM
You should add a resistor otherwise the IR-LED won't last very long

If im not mistaken most blue and white LED's are around 3v and most IR LED's are around ~1.4v  so this is very true what you say.  The keychange probably has 2 batteries.  I think if you bought a red one it would work better because most red LEDs are about 1.4v as well.

Just might thoughts, i could be totally wrong

Dice :)