Author Topic: Momentary switch for IR pen  (Read 5096 times)

Offline mcram

  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
on: October 31, 2008, 02:51:33 PM
I started making my IR pen the other day.  I collected all my supplies from my local electronics shop and put it all together.  What I didn't know (because I didn't really read the posts) was that you needed a momentary switch for the pen.  So after building this thing I had to take it apart to rebuild it correctly.  Since I didn't have time to got to the electronics store that day, I started looking around to see what I could find for a momentary switch.  Then I thought of a couple of old mice that I have stashed in a drawer.  I ripped the mouse apart and soldiered to the board were three momentary switches that were small and easy to use.  All you need to do is de-soldier them from the board and use them in your IR pen.  I will try and post up some pics of the pen, but if you have some extra mice lying around, you can use the momentary switches out of them.



Offline UndCon

  • Support Admin
  • *
  • Posts: 566
  • Karma: +11/-3
    • View Profile
    • UndCon
Reply #1 on: November 05, 2008, 11:07:37 AM
If you can desolder things you can also get switches from old CD/DVDplayers

//UndCon