Author Topic: IR pen calibration / tracking problems  (Read 10836 times)

Offline azparis

  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
on: September 25, 2009, 06:04:51 AM
My husband made me a wiimote and an IR pen for my birthday.  I downloaded the software - Wii Whiteboard and did the calibration just fine on my projecter/whiteboard.  It is working and recognizing the wiimote, but when I put the wiimote on the board, the cursor is in a different spot (sometimes I can't even find the cursor).  I haven't mounted the remote anywhere yet, but figured I'd make sure it all works before I find a solid spot for it.  For now, I was just pointing it at the board from a few feet back and staying out of the way of the remote.  Everything seems to be fine since it does recognize it, but just doesn't "track" with where my pen is.  What am I missing or doing wrong?



Offline boonjin

  • *
  • Posts: 929
  • Karma: +28/-0
  • Smoothboard Developer
    • View Profile
    • Smoothboard
Reply #1 on: September 25, 2009, 06:15:05 AM
Hi,

Before the software can track the IR pen, you will need to calibrate the software.

You can take a look at the guide written by Ben on how to calibrate with Smoothboard from
http://www.boonjin.com/smoothboard/index.php?title=Calibration

Smoothboard has a calibration guide which will help you with getting the optimum calibration.

Regards,
Boon Jin

Smoothboard
Wii Whiteboard/Wiimote Whiteboard with annotation features and collaborate with multiple iPads and Android Tablets!

Smoothboard for Mac
Using a Mac? Now you can annotate on PowerPoint or Keynote slideshows!

BoonJin[/url


Offline azparis

  • *
  • Posts: 2
  • Karma: +0/-0
    • View Profile
Reply #2 on: September 25, 2009, 04:07:04 PM
Hey, thanks for the quick response!  I did the calibration on the Wii whiteboard software that I got from Johnny Lee.  I touched the four calibration points.  Is there more to do?  It shows that it recognizes it - where it shows a count - when I click my ON button on my pen and put it to the board, it shows that it recognizes "1".  I don't know what I'm doing wrong.



Offline boonjin

  • *
  • Posts: 929
  • Karma: +28/-0
  • Smoothboard Developer
    • View Profile
    • Smoothboard
Reply #3 on: September 25, 2009, 08:09:46 PM
Hi,

So does that mean that you are able to calibrate the Wiimote but not being able to track the IR pen?

When you 'on' the pen, where does the cursor appear?

Maybe the cursor control was switched off. If the cursor appears on the top left corner usually it is caused by some other infrared source or a faulty/non-genuine Wiimote.

You should use the Smoothboard software to help you check what is the issue.

Regards,
Boon Jin

Smoothboard
Wii Whiteboard/Wiimote Whiteboard with annotation features and collaborate with multiple iPads and Android Tablets!

Smoothboard for Mac
Using a Mac? Now you can annotate on PowerPoint or Keynote slideshows!

BoonJin[/url