Author Topic: Problem with IR pen (Read 6319 times)

aghasina · **on:** November 01, 2011, 06:06:04 AM

Hi , i have made a simple pen for interactiveboard with TSAL6200 vishay . like this picture
http://wouwlabs.com/blogs/jeez/wp-content/uploads/2008/11/ir_pen1.jpg

but there is problem. when i want to write with this pen , doesn't work good like the videos that you uploaded in net . i read the user guide and notice to notification but didn't solve . i guess the reflex of a LED it's not good and not durable . i am working with "Scope Screen" that is not glassy screen and it is about 70 inch.what is the pen problem and LED?maybe wiimote can't see the IR from away. what should I do?
thanks

boonjin · **Reply #1 on:** November 01, 2011, 08:05:23 AM

You may want to purchase a ready made IR Pen. This will save you a lot of time troubleshooting the issue.

Regards,
Boon Jin

aghasina · **Reply #2 on:** November 01, 2011, 03:11:11 PM

Quote from: boonjin on November 01, 2011, 08:05:23 AM

You may want to purchase a ready made IR Pen. This will save you a lot of time troubleshooting the issue.

Regards,
Boon Jin

In other hand , If i purchase a ready IR pen this problem will be solve? with any postion of wiimote ?

boonjin · **Reply #3 on:** November 01, 2011, 04:56:27 PM

It may at least eliminate the issues if there are with a self-made IR pen.

You can place the Wiimote as close a possible to the screen by adjusting the position with the use of the Smoothboard's Calibration Viewer.

Regards,
Boon Jin

Wiimote Project

Author Topic: Problem with IR pen (Read 6319 times)

aghasina

Problem with IR pen

boonjin

Re: Problem with IR pen

aghasina

Re: Problem with IR pen

boonjin

Re: Problem with IR pen