Author Topic: Pulsing the IR Led + LED Lense  (Read 4527 times)

Offline DerTürke86

  • *
  • Posts: 20
  • Karma: +1/-0
    • View Profile
on: May 23, 2008, 04:17:32 AM
Hallo People

i have get some tips from some Friends. They sayed that i could pulse the Ir Led to get more power and when i put an LED lense on the Led it would be much more efektive and i could stand 5 meters from the screen and it would works fine. What would you say about that?
I will try this out and will tell you then the results.


Greetz



Offline UndCon

  • Support Admin
  • *
  • Posts: 566
  • Karma: +11/-3
    • View Profile
    • UndCon
Reply #1 on: May 23, 2008, 08:44:18 AM
Of course a lens will help - much like the one i tested here from my Laserpointer

http://www.wiimoteproject.com/ir-pens/pulsing-the-ir-led-led-lense-t943.0.html#msg3732

Ill see if they have LED-lenses in my local shop...

//UndCon



Offline inio

  • Wiki Admin
  • *
  • Posts: 124
  • Karma: +5/-0
    • View Profile
    • my Wii Remote projects
Reply #2 on: May 23, 2008, 03:50:35 PM
Pulsing won't help much.  Which the efficiency of LEDs increases slightly at higher currents, it's not that significant.  Also, for the Wii Remote to track the pulsed LED nicely, you'd need to be pulsing it at at least about 500Hz.



Offline tokko1

  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Reply #3 on: May 24, 2008, 10:42:44 AM
What kind of lense should i use??
I used my pen selfmade on my computer screen but the line is totaly not straid?
And the distance is about 50 cm??
Any way to fix this?
(its a IR led:
s(max) mm: 950
If mA: 100
f: ± 10°)