Author Topic: IR Array online?  (Read 7970 times)

Offline Arsenal

  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
on: November 05, 2008, 04:45:15 PM
Hello,

I wonder if there's anywebsite selling working IR Array for Finger Tracking Project of Johnny Lee

I did search through every post of this forum and only found out some posts by admin about websites selling parts of the IR Array.

You still have to end up making one yourself!

And it is totally impossible for a person who know nothing about electric like me!

Please can you help me!

Thank you very much!



Offline UndCon

  • Support Admin
  • *
  • Posts: 566
  • Karma: +11/-3
    • View Profile
    • UndCon
Reply #1 on: November 06, 2008, 01:06:04 PM
I'm about to get some arrays

They look like this one but with IRdiodes...





Of course they can be clustered together...

Dualsided PCB, 12pc 5mm diodes. measures only 42x12x1,6mm.
4 circuits of 3 diodes in series - can also be sold separately.

Will be tricked out with 12 VISHAY TSAL 6400 IR diodes and surface-mounted resistors

They will require 6Volt powersource and if needed I can supply that one as well...


I have no clue yet of the total cost but as usual I'll charge as less as possible to maintain the service to forum members

//UndCon
« Last Edit: November 06, 2008, 01:12:19 PM by UndCon »



Offline Arsenal

  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
Reply #2 on: November 10, 2008, 10:48:19 AM
That would be great if you can make me one!

As long as it works, I don't put much stress on money  :)

Also, I wonder if your array looks different from Johnny's as on the video, he said you should make a hole in the middle of the array for the Wiimote?

Regards



Offline beaver

  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Reply #3 on: November 12, 2008, 07:36:26 PM
Hi there,

I'm interested too  :)

beaver



Offline UndCon

  • Support Admin
  • *
  • Posts: 566
  • Karma: +11/-3
    • View Profile
    • UndCon
Reply #4 on: November 27, 2008, 08:24:11 AM

It's all set up!
I only have to order a few PCB's and most likely LED-drivers to go...

I already have Vishay's so I have some soldering to do :)

Then I can start distributing PCB's as DIY or preassembled with Vishay's

//UndCon