Wiimote Project

Hardware Support => Other => Topic started by: sideline on July 15, 2008, 10:59:04 PM

Title: My array
Post by: sideline on July 15, 2008, 10:59:04 PM
Hi:
I am new here, I just want to share the LED array that I did today. Each column of 4 LEDs are in series with a 220 Ohm resistor, the columns are in parallel between each other. I use a 9V power supply and a small switch.

It has only 23 Infrared LEDs, and I use one blue LED as a pilot to know when it is working. There is plenty of space to add more LEDs in the future.
Title: Re: My array
Post by: UndCon on July 16, 2008, 12:50:22 AM
Nice DIY

You can even make a PDF for printouts for that support ;)

If it is not working properly (as mentioned in the other thread) try blocking 1 half of the array to get a cleanser reflection
Title: Re: My array
Post by: sideline on July 19, 2008, 05:31:24 PM
Hi!

I added the PDF with the instructions for the support at the download area.

I will do your advice and let you know. :)