Author Topic: Projector screens and Smoothboard....  (Read 6256 times)

Offline Killbill

  • *
  • Posts: 12
  • Karma: +0/-0
    • View Profile
on: May 25, 2010, 03:56:05 AM
I have a question about buying a projector screen. Something like this

http://www.rentourprojectors.com/images/projector%20screen.jpg

I will install it to the wall, but (like all projector screens do) it moves lightly to the wall side and comes back. that because projection screens are not solid, they just hold from 1 side. The other side its on the air...

So while the projection screen is mooving am i gonna be able to write? Wiimote gonna detect the IR writing while its slightly moves?

IF the detection its ok with little movement then i am ok.

If not i can give it back, shortly, and take an ink  whiteboard? on that size



Offline boonjin

  • *
  • Posts: 929
  • Karma: +28/-0
  • Smoothboard Developer
    • View Profile
    • Smoothboard
Reply #1 on: May 25, 2010, 07:12:45 AM
Hi,

As I have already replied directly to your emails, it will still work but the cursor tracking may be slightly off due to the change in the position of the screen.

I guess you can just go ahead and try it.

Regards,
Boon Jin

Smoothboard
Wii Whiteboard/Wiimote Whiteboard with annotation features and collaborate with multiple iPads and Android Tablets!

Smoothboard for Mac
Using a Mac? Now you can annotate on PowerPoint or Keynote slideshows!

BoonJin[/url


Offline Killbill

  • *
  • Posts: 12
  • Karma: +0/-0
    • View Profile
Reply #2 on: May 25, 2010, 07:26:33 AM
Thanks for your help, i really appreciate.

I will go on and do it, i opened this thread to find out if someone has a negative experience on this type of projector screen.

The issue you are mentioning it doesnt look so important i guess. The big issue would be the pen to stop writing or not responding.



Offline shakespeare1212

  • *
  • Posts: 97
  • Karma: +0/-0
  • The soul of Dr. Nuclear
    • View Profile
    • Whalebone IR and Software
Reply #3 on: May 27, 2010, 11:47:13 PM
Kill Bill,

Please allow me to make to recommendations that might improve your experience with one of these pull down screens. Firstly, although I'm not too fond of this one because someone might trip, you could drill some anchor points in the floor and run a string to hold the screen tight.

Also, you should us a pen that does not work with pressure based activation. Even pens that do work with a pressure tip often also have a push button method for activating the pen as well. In short, you don't have to touch the screen. Just hold your IR pen in front of the screen with the LED in the place where you would like to draw a line, and press the button.

The Wii Remote will detect and draw just fine. Please keep us informed of your progress. I am sure that you are not the only person with this same issue.

James McLain
http://whaleboneir.com

James Mclain
Owner and Creator of
Whalebone IR and Software

http://whaleboneir.com

or view and buy our products on ebay:

http://ebay.com   Search for IR pen or products by shakespeare1212.